BACK

13.0 Compiler Directives

 

EDA tool vendors and tool users may define tasks and functions specific to their tool, such as text output or waveform displays.

  • System tasks and functions begin with the $ (dollar sign).
  • Users may define additional built-in tasks and functions using the Verilog Programming Language Interface (PLI).
  • A few of the most common system tasks and functions are listed in this section.

 

Text Formatting Codes

%b
%o
%d
%h
%e
%f
%t
binary values
octal values
decimal values
hex values
real values-exponential
real values-decimal
formatted time values
%s
%m
\t
\n
\"
\\
%%
character strings
hierarchical names
print a tab
print a newline
print a quote
print a backslash
print a percent sign
A zero in format codes (e.g.: %0d) displays the value using the
minimum field width required. The %e and %f may specify the
field width for both sides of the decimal point (e.g.: %5.2f)
$monitor("text_with_format_specifiers", signal, signal, ... );
Invokes a background process that continuously monitors the signals listed, and prints the formatted message whenever one of the signals changes. A newline is automatically added to the text printed.
$display("text_with_format_specifiers", signal, signal, ... );
Prints the formatted message once when the statement is executed during simulation. A newline is automatically added to the text printed.
$write("text_with_format_specifiers", signal, signal, ... );
Like $display statement, except that no newline is added.
$strobe("text_with_format_specifiers", signal, signal, ... );
Like the $display statement, except that the printing of the text is delayed until all simulation events in the current time step have executed.
mcd = $fopen("file_name");
A function that opens a disk file for writing, and returns a 32-bit integer multi-channel-descriptor (mcd) pointer to the file.
$fclose(mcd);
A function that closes a disk file that was opened by $fopen.
$monitor(mcd, "text_with_format_specifiers", signal, signal, ... );
$display(mcd, "text_with_format_specifiers", signal, signal, ... );
$write(mcd, "text_with_format_specifiers", signal, signal, ... );
$strobe(mcd, "text_with_format_specifiers", signal, signal, ... );
Variations of the text display tasks that write to files which have been opened with $fopen.
$time
Returns the current simulation time as a 64-bit integer.
$stime
Returns the lower 32-bits of simulation time as an integer.
$realtime
Returns the current simulation time as a real number.
$timeformat(unit, precision, "suffix", min_field_width);
Controls the format used by the %t text format specifier.
  • unit is the base that time is to be displayed in, from 0 to -15
  • precision is the number of decimal points to display.
  • suffix is a string appended to the time, such as " ns".
  • min_field_width is the minimum number of characters that will be displayed.
  0 =   1 sec
 -1 = 100 ms
 -2 =  10 ms
 -3 =   1 ms 
 
 -4 = 100 us
 -5 =  10 us
 -6 =   1 us 
 
 -7 = 100 ns
 -8 =  10 ns
 -9 =   1 ns 
 
-10 = 100 ps
-11 =  10 ps
-12 =   1 ps 
 
-13 = 100 fs
-14 =  10 fs
-15 =   1 fs 

Example: $timeformat(-9, 2, " ns", 10);

$printtimescale(module_hierarchical_name);
Prints the time scale of the specified module, or the scope from which it is called if no module is specified.
$random(seed);
Returns a random 32-bit signed integer.
$readmemb("file_name", register_array, start, end);
$readmemh("file_name", register_array, start, end);
Opens a file for reading, and loads the contents into a register memory array. The file must be an ASCII file with values represented in binary ($readmemb) or hex ($readmemh). The start and end address values are optional.
$finish;
Finishes a simulation and exits the simulation process.
$stop;
Halts a simulation and enters an interactive debug mode.

 

 

TOP

 BACK